1. Is the air pressure proper?
If a tire is used without having sufficient air pressure, much
heat is generated from the tire. Thus, it causes separation of the rubber
and code besides the code disconnection and tire rupture. Also, the edge of
the tires is worn-out easily shortening the life of the tires. Meanwhile if
a tire is used having excessive air pressure, the tire is always under a
state of tension. For this reason, the tire may be ruptured and cut easily
in case of having an external impact. Also, a vehicle tends to skid when
pressing the break and the middle
part of the tire is worn out fast shortening the life of a tire.
2. Are there any tires that are abnormally worn-out
(Partial abrasion)?
To prevent an abnormal abrasion, the air-pressure and wheel
alignment should be checked regularly and the tire position
should be replaced after driving 8,000~10,000km for even abrasion of the
tires (The tire replacement may be adjusted depending on the worn-out
condition).
3. Are there any tires below than Treadwear Index (TI) (Depth
of the left dent: 1.6mm)?
If a tire below Treadwear Index (TI) is used, a vehicle is
easily skidded as the breaking distance becomes longer. Also, it tends to be
ruptured when an alien substance is pierced and generate hydroplaning
causing difficulty in breaking and handling operation.
4. Are there any damages?
If a tire is operated having an alien substance, such as a
nail or stone, inside the tread dent, the tire may be punctured or
rupture. Presence of tire damage shall be checked in the tire store and
any damaged tires must be replaced to a new one in case when
the damage threatens the safety of carcass.
5. Is there any abnormality on the spare tires?
For a spare tire, the air pressure, presence of damage, and
abrasion state must be checked in regular base for its instant use when
needed. Any old tires mustn’t be used.
6. Are the wheels balanced well?
The poor wheel balance causes difficulty in driving as the
handle shakes and discomfort while driving. Also, it generates partial
abrasion and severe noise.
7. Is there any damages on the wheels?
The damaged wheel is the cause of an accident as the
air-pressure is released. It also causes rupture of a tire by the
irregular load distribution. Meanwhile, the heat generated by the
friction at the rim and bead part of a tire damages the code.
